Cressi XS2/AC2 Regulator, XS Octopus Package and Mini Gauge

(359 g) w/Hose Pressure Gauge:---- Pressure Gauge MaterialsCase: Chromed BrassLens: GlassBoot: Polycarbonate & Desmopan Pressure Readout0 to 5000 psi Luminous DialYes Attachment PointNot Specified by Manufacturer Threads7/16". (994 g) w/HoseOctopus: 12.7 oz. Regulators:---- 1'st Stage TypeNon-Balanced Flow-By Piston LP PortsFour 3/8" Thread PortsOne 7/16" Thread Adjustable 2'nd StageYes, Dive/Pre-Dive Venturi Adjustment Switch 2'nd Stage TypeDownstream Demand Valve MaterialsFirst Stage: Chromed BrassSecond Stages: Techno-PolymersRubber Parts: Silicone & Buna-N O-Rings Hose Thread3/8" Hose LengthPrimary: Not Specified by ManufacturerOctopus: 39" (100 cm) Total WeightPrimary: 35 oz. The package is made in Italy. Pressure gauge is equipped with a 7/16" threaded high-pressure hose. The gauge boot has an attachment point for a clip or lanyard. The pressure gauge housing is durable chrome plated brass. The instrument is housed in a small, modern shaped boot, made from polycarbonate and Desmopan, (a thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very lightweight. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. The front glass lens is made to act as a pressure relief valve. From 600 to approximately 3,000 psi is green and from 3,000 to end of scale is blue. If gauge is used on deeper dives, the red scale extends and fades to 1,300 psi, this provides for added reserve air indication required at greater depths. For at-a-glance monitoring of air pressure the instruments face is divided into three different colored zones: 600 psi and below is highlighted in red with a solid bar and red stripes. The Cressi Mini-Manometer Pressure Gauge luminescent dial reads from 0 to 5000 psi. Regulator is certified to Annex B EN 250.2014 standards. (359 g) with the hose. (206 g) without the hose and 12.7 oz. The regulator weighs 7.27 oz. The regulator has a soft and comfortable liquid silicone mouthpiece and the housing is made of durable impact immune hi-tech polymers. The XS Octopus is equipped with a 39" (100cm) 3/8" threaded hose, has a yellow front protector for easy identification in an out-of-air-emergency. The XS Octopus has a dependable downstream demand valve mechanism for reliable performance. The XS has a Venturi dive/pre-dive switch which will help control the sensitivity of the regulator when not in use, yet when switched from the pre-dive to dive position the regulators performance will instantly increase. The XS Octopus is a lightweight, high performance second stage regulator. Regulator is certified to EN250/2000 standards. (994 g) with the hose and comes with an owner's manual. The XS2 Compact AC2 Regulator weighs 35 oz. Regulator comes with a comfortable silicone mouthpiece. The 2'nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The XS2 Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. A conical filter is used which has greater surface area for higher air flow characteristics through the 1'st stage regulator. The 1'st stage has 1 port and 4 LP ports and is made from marine grade chromed brass for long life and durability. The XS2/AC2 Regulator is an exceptionally dependable non-balanced flow-by-piston designed 1'st stage regulator that is a top-notch choice as a new diver's rig, or for use as a stage bottle regulator system